Aro

Close

1. Introduction

2. Safety

3. ARO Aftermarket Parts Information

4. Disassembly – Overview Required Tools

5. Disassembly – Alignment Markings

6. Disassembly – Disconnect Motor / Lower

7. Disassembly - Remove Tie Rods

8. Disassembly - Loosen Solvent Cup

9. Disassembly - Remove Adapter

10. Disassembly - Remove Plunger Rod Assembly

11. Disassembly - Disassemble Lower Packings Assembly

12. Disassembly - Disassemble Upper Ball & Seat Assembly

13. Disassembly - Disassemble Upper Packing Assembly

14. Disassembly - Disassemble Lower Ball & Seat Assembly

15. Kit Installation & Assembly

16. Kit Installation & Assembly Overview

17. Assembly – Lubricate Packings & Seals

18. Assembly – Assemble Upper Packings

19. Assembly – Assemble Solvent Cup Assembly

20. Assembly – Lower Packings Assembly

21. Assembly – Assemble Upper Ball & Seat Assembly

22. Assembly – Plunger & Piston Assembly

23. Assembly – Assemble Adapter

24. Assembly – Piston

25. Assembly – Solvent Cup & Plunger Assembly

26. Assembly – Outlet Body Assembly

27. Assembly – Plunger Assembly

28. Assembly – Tighten Nut

29. Assembly – Lower Ball & seat Assembly

30. Assembly – Tighten Solvent Cup Assembly

31. Assembly – Connect Motor / Lower

Step 19 of 31

19

Assembly – Assemble Solvent Cup Assembly

Place (Item 77) bushing into (Item 1) solvent cup and thread (Item 1) solvent cup into the (Item 74) nut.

NOTE: Do not tighten.

Put or move this assembly aside.

Back

Next