Toggle navigation
2-Ball
2-Ball
4-Ball
Chop Check
Lower Pump End - Service Kit Installation (PN: 66300-XXX)
Lower Pump End - Service Kit Installation (PN: 66300-XXX)
Lower Pump End - Service Kit Installation (PN: 66475-XXX)
Lower Pump End - Service Kit Installation (PN: 66300-XXX)
All Steps
All Steps
Close
1. Introduction
2. Safety
3. ARO Aftermarket Parts Information
4. Disassembly – Overview Required Tools
5. Disassembly – Alignment Markings
6. Disassembly – Disconnect Motor / Lower
7. Disassembly - Remove Tie Rods
8. Disassembly - Loosen Solvent Cup
9. Disassembly - Remove Adapter
10. Disassembly - Remove Plunger Rod Assembly
11. Disassembly - Disassemble Lower Packings Assembly
12. Disassembly - Disassemble Upper Ball & Seat Assembly
13. Disassembly - Disassemble Upper Packing Assembly
14. Disassembly - Disassemble Lower Ball & Seat Assembly
15. Kit Installation & Assembly
16. Kit Installation & Assembly Overview
17. Assembly – Lubricate Packings & Seals
18. Assembly – Assemble Upper Packings
19. Assembly – Assemble Solvent Cup Assembly
20. Assembly – Lower Packings Assembly
21. Assembly – Assemble Upper Ball & Seat Assembly
22. Assembly – Plunger & Piston Assembly
23. Assembly – Assemble Adapter
24. Assembly – Piston
25. Assembly – Solvent Cup & Plunger Assembly
26. Assembly – Outlet Body Assembly
27. Assembly – Plunger Assembly
28. Assembly – Tighten Nut
29. Assembly – Lower Ball & seat Assembly
30. Assembly – Tighten Solvent Cup Assembly
31. Assembly – Connect Motor / Lower
Step 22 of 31
22
Assembly – Plunger & Piston Assembly
Thread the
(Item 33) piston
assembly into the bottom of the
(Item 26) plunger
.
Back
Next