Aro

Close

1. Introduction

2. Safety

3. ARO Aftermarket Parts Information

4. Disassembly – Overview Required Tools

5. Disassembly – Alignment Markings

6. Disassembly – Disconnect Motor / Lower

7. Disassembly – Remove Inlet Body

8. Disassembly – Disassemble Lower Body

9. Disassembly – Remove Ball Cap Assembly

10. Disassembly – Disassemble Ball Cap Assembly

11. Disassembly – Remove Solvent Cup

12. Disassembly – Disassemble Gland Nut

13. Disassembly – Remove Tie Rod Hardware

14. Disassembly – Remove Upper Body & Downtubes

15. Disassembly – Remove & Disassemble Tube

16. Disassembly – Remove Pump Rod Assembly

17. Disassembly – Disassemble Lower Packing Assembly

18. Kit Installation & Assembly

19. Kit Installation & Assembly Overview

20. Assembly – Lubricate Packings & Seals

21. Assembly – Assemble Lower Packing Assembly & Pump Rod

22. Assembly – Assemble Lower Packing Assembly Into Tube

23. Assembly – Assemble Downtubes

24. Assembly – Assemble Tube & Pump Rod

25. Assembly – Assemble Tie Rods to Upper Body

26. Assembly – Assemble Gland Nut

27. Assembly – Assemble Upper Packing Assembly

28. Assembly – Assemble Solvent Cup

29. Assembly – Assemble Upper Body

30. Assembly – Assemble Tie Rods

31. Assembly – Assemble Lower Body

32. Assembly – Assemble Inlet Body

33. Assembly – Install Ball Cap Components

34. Assembly – Connect Motor / Lower

Step 11 of 34

11

Disassembly – Remove Solvent Cup

Using ARO part number 93456-1 or a ⅜" diameter rod, unscrew and remove (Item 1) solvent cup, releasing (Item 77) bushing.

Back

Next