Place the complete pump assembly into the vice by the (Item 6) outlet body and secure.

Note: Be sure to position the fasteners away from the vice to allow easy access to the fasteners.

Note: Do not clamp on model plate.

With a 1 ½" box/open end wrench (or adjustable wrench) on the (Item 12) nuts and with a 16" adjustable wrench on the (Item 10) stud flats, remove the three (Item 12) nuts along with the three (Item 17) lock washers and six (Item 46) washers.

Note: Use a soft mallet and tap the end of the wrench to assist in removing the (Item 12) nuts.

Take the pump assembly out of the vice.