Aro

Close

1. Introduction

2. Safety

3. ARO Aftermarket Parts Information

4. Disassembly – Overview Required Tools

5. Disassembly – Alignment Markings

6. Disassembly – Disconnect Motor / Lower

7. Disassembly – Primer Plate Assembly

8. Disassembly – Loosen the Solvent Cup

9. Disassembly – Remove Nuts

10. Disassembly – Remove Packing Nut and Disassemble Outlet Body

11. Disassembly – Remove Studs

12. Disassembly – Remove Outlet Body

13. Disassembly – Remove Plunger Assembly

14. Disassembly – Disassemble Pressure Chamber Body

15. Disassembly – Disassemble Foot Valve Body

16. Disassembly – Remove Tube from Plunger

17. Disassembly – Lock Nut

18. Disassembly – Remove Valve

19. Disassembly – Disassemble Packing Assembly

20. Disassembly – Disassemble Valve Seat

21. Kit Installation & Assembly

22. Kit Installation & Assembly Overview

23. Assembly – Lubricate Packings & Seals

24. Assembly – Solvent Cup / Packing Nut Bushing

25. Assembly – Solvent Cup / Packing Nut

26. Assembly – Primer Rod to Valve

27. Assembly – Valve Seat

28. Assembly – Valve Seat Packing Assembly

29. Assembly – Valve

30. Assembly – Plunger and Valve

31. Assembly – Foot Valve Body

32. Assembly – Pressure Chamber Body Assembly

33. Assembly – Tube

34. Assembly – Outlet Body Assembly

35. Assembly – Studs

36. Assembly – Solvent Cup / Packing Nut

37. Assembly – Studs

38. Assembly –Primer Plate Assembly

39. Assembly – Connect Motor / Lower

Step 11 of 39

11

Disassembly – Remove Studs

Completely remove the three (Item 10) studs with a 16" adjustable wrench on the stud flats.

Back

Next