Aro

Close

1. Introduction

2. Safety

3. ARO Aftermarket Parts Information

4. Disassembly - Overview Required Tools

5. Disassembly – Alignment Markings

6. Disassembly – Disconnect Motor / Lower

7. Disassembly – Loosen the Solvent Cup

8. Disassembly – Remove Nuts & Retaining Ring

9. Disassembly – Studs & Solvent Cup

10. Disassembly – Material Tube

11. Disassembly – Material Tube (continued)

12. Disassembly - Retaining Nut & Adapter

13. Disassembly – Remove Adapter from Plunger

14. Disassembly – Remove Adapter from Plunger

15. Disassembly – Remove Packing

16. Disassembly – Remove Ball Guide

17. Disassembly – Ball Area

18. Disassembly – Outlet Body

19. Disassembly – Outlet Body

20. Kit Installation & Assembly Overview

21. Kit Installation & Assembly Overview

22. Assembly – Lubricate Packings & Seals

23. Assembly – Outlet Body

24. Assembly – Install Plunger Parts

25. Assembly – Solvent Cup

26. Assembly – Adapter

27. Assembly – Adapter (continued)

28. Assembly – Adapter (continued)

29. Assembly – Adapter (continued)

30. Assembly – Tube on Outlet Body

31. Assembly – Foot Valve Body

32. Assembly – Foot Valve Body (continued)

33. Assembly – Foot Valve to Material Tube

34. Assembly – Foot Valve to Material Tube (continued)

35. Assembly – Foot Valve to Material Tube (continued)

36. Assembly – Foot Valve to Material Tube (continued)

37. Assembly – Connect Motor / Lower

Step 15 of 37

15

Disassembly – Remove Packing

With o-ring pick, remove the (Item 8) Poly seal packing from the (Item 15) foot valve body.

Tools needed for this step:

O-ring pick

Back

Next